AccuRIP Black Pearl is a professional RIP software for printing quality film easily and accurately from your inkjet printer.
Your supported Epson printer must be operational and can print directly through the Epson printer. Make sure you are have set up the printer with a genuine Epson printer driver. AccuRIP requires the genuine driver to connect with.
Install AccuRIP Black Pearl and follow the Wizard instructs to detect and connect to your desired supported printer. Quickly an AccuRIP to Epson Driver will be built. The Wizard setup will also allow you to select your settings (i.e. resolution, droplet weight, halftone options).
To use AccuRIP you will remain within the file of the graphics software (i.e. Corel, Adobe) and when you bring up the Print Window the AccuRIP to Epson Driver will be selected as your printer. The “Output” selection the Print Window needs to be “Separations (Host-Based)” and NOT “Composite” in order to be ready to print your separation.
A “separation” is single color to multi-color. Do not use the standard Epson Driver for single color job as the Epson Driver will not deliver what you need. You have AccuRIP and should get all the control and quality a PostScript solution has to offer.
Expect accurate quality results upon output. If the results are not what you expected, the solution is found either in the file itself, the selected droplet weight or resolution, the inkjet film and ink, or the hardware. The support team can assist you in determining what has gone wrong. Expect the very best from AccuRIP. It is used by tens of thousands of users globally for more than a decade. You can expect the same success.