My Epson printer is displaying a message on the control panel that says “wrong ink cartridge”. You have inserted a cartridge for a different model printer or the wrong cartridge into a slot. Check the labels on the cartridges. Check that all cartridges correspond with their matching slot and that you have the proper cartridges for your printer model. Finally, cartridges have a computer chip on them, it is rare, but the wrong chip could have been installed onto the cartridge. Check all the obvious things first such as proper model and slot. If trouble continues contact Live Agent Support.
In the meantime to keep printing replace the cartridge or cartridges with your stock Epson cartridge to get the printer into the Ready Mode.
When using the All Black Ink System for AccuRIP Black Pearl users should open the Edit Configuration, and in the multi-black option deselect the cartridge(s) not in use so it does not print until it is replaced. Once replaced with proper a working cartridge remember to turn back ON the cartridge(s) in the Multiblack feature. Failure to do this properly will result in uneven cartridge draining.
Epson needs to have a full set of cartridges that read an ink level and properly set in order to allow the device to be ready for printing.